苏州Installation steps and precautions for LED filament lamps

Installation steps and precautions for LED filament lamps
LED filament lamps are currently a popular lighting product in the market. Compared to traditional incandescent lamps, LED filament lamps have higher brightness and lower energy consumption. It is easy to install and has a long lifespan, but there are still some precautions to be taken during the installation process. The following are the installation steps and precautions for LED filament lamps.
1、 Installation steps for LED filament lamp: 1. Prepare tools and materials: wrench, insulation tape, power cord, LED filament lamp, installation bracket, etc. 2. Power off: Before installation, ensure that the power is turned off and disconnect the power cord. 3. Choose installation location: According to actual needs, choose a suitable location to install LED filament lamps, considering lighting effects and aesthetics. 4. Fixed installation bracket: Use screws to fix the installation bracket in the selected position, ensuring that the bracket is stable and reliable. 5. Connect the power cord: Use a wrench to connect both ends of the power cord to the power contact point of the LED filament lamp, with one end fixed to the filament lamp and the other end fixed to the power cord with insulating tape. 6. Install the filament lamp: Insert the LED filament lamp into the mounting bracket, ensuring that the filament lamp is tightly attached to the bracket. 7. Adjust the angle of the filament lamp: Adjust the angle and direction of the filament lamp according to actual needs to achieve good lighting effects. 8. Power on test: After installation, reconnect the power and test whether the LED filament lamp is working properly.

2、 Precautions for LED filament lamps: 1. Safety voltage: During installation, it is necessary to ensure that the working voltage of the filament lamp is consistent with the power supply voltage used to avoid damage to the filament lamp caused by excessive or insufficient current. 2. Anti electric shock: When installing or replacing filament lamps, be sure to disconnect the power supply and use insulated tools to avoid the risk of electric shock. 3. Transparent medium: LED filament lamps need to scatter light through transparent media (such as lampshades or fixtures), so when choosing the installation location, the suitability of transparent media should be considered to ensure good lighting effects. 4. Avoid high temperatures: LED filament lamps are very sensitive to high temperatures, so it is important to avoid prolonged use in high-temperature environments. When installing, choose a well ventilated location to avoid overheating of the filament lamp and affecting its service life. 5. Grounding protection: The installation of LED filament lamps requires attention to grounding protection, ensuring that the metal parts of the lamp are well connected to the ground wire to prevent leakage or electric shock accidents. 6. Waterproof and moisture-proof: If it is necessary to install in a damp or water flowing environment, waterproof LED filament lamps should be selected, and the waterproof performance of the power cord and connector should be ensured. During installation, it is also important to ensure a secure connection between the filament lamp and the junction box to prevent moisture from seeping in.