明光How to install and use LED bulbs correctly?

How to install and use LED bulbs correctly?
LED bulbs are energy-saving and environmentally friendly lighting products that can effectively reduce energy consumption when used properly. The following will provide a detailed explanation on how to correctly install and use LED bulbs.
1、 When purchasing LED bulbs, the following points should be noted:
Purchase branded products from legitimate channels to ensure product quality and safety.
Choose the appropriate bulb model and brightness level as needed, such as E27 or E14 model. Generally speaking, the brightness of a light bulb is expressed in lumens (lm) and can be selected according to actual needs.
2、 Before installing the LED bulb, please make sure to disconnect the power and follow the steps below:
Firstly, confirm that the power has been disconnected.
Unscrew the original bulb, then gently grip the bottom and body of the LED bulb, insert the bulb into the socket, and rotate it clockwise to secure the bulb.
Be careful not to apply too much force when inserting the lamp socket to avoid damaging it.

3、 Using LED bulbs
Turn on the power switch, ensure the light bulb is working properly, and adjust the brightness to the appropriate level.
LED bulbs have a long lifespan, with a service life of tens of thousands of hours, but it is also important to pay attention to proper use to extend their lifespan. a. Avoid frequent switching, as frequent switching may shorten the lifespan of the light bulb. So consider the required usage time before turning on and off the light bulb. b. Avoid excessive use, as prolonged use may cause overheating and affect the lifespan of the light bulb. Try to avoid prolonged continuous use and take appropriate breaks to reduce the heat generated by the use of light bulbs. c. Avoid using in humid environments, as LED bulbs are prone to moisture and can affect their lifespan. d. Regularly clean the surface of the light bulb to maintain good heat dissipation.
4、 Precautions
When installing or replacing light bulbs, remember to disconnect the power supply to avoid electric shock and injury.
Avoid direct contact with the LED bulb beads by hand, as dirt on the hands may affect the luminous effect of the beads.
Do not mix LED bulbs with other bulbs to prevent uneven light emission and even damage to the bulbs.
When cleaning the light bulb, be sure to turn off the power first, and then wipe it with a clean soft cloth to avoid using corrosive or abrasive cleaning agents.
If LED bulbs are found to be dim, flickering or other abnormal conditions, they should be replaced in a timely manner.
If you need to replace the light bulb, please choose the appropriate LED bulb model and brightness according to your actual needs.